The Leading Manufacturer of Durable Phototherapy Equipment

FULL BODY UNITS SPECIFICATIONS

CONTROL SYSTEM:

The Ultralite 6809 computer control system allows dosimetry/timer control and requires no outside measuring devices since an internal sensor measures light intensity. This system monitors for error constantly and can be programmed to lock out undesired operating modes.  This allows every machine to be set up in a tailored fashion and can be easily changed at a later date.  This control system can be updated with any future software so your equipment is never obsolete.

TECHNICAL SPECIFICATIONS:

- State-of-the-art electronics throughout the machine

- Solid state electronic ballasts for maximum intensity and lamp life

- Computer control with integrating dosimetry for UVA and UVB

- Sensor checking and alarm circuit detects sensor malfunctions and stops machine operation

- Timer display mounted inside the chamber for patient convenience and safety

- RS232 port for connecting to an external printer

- Programmable password system means maximum security with no keys to lose or break

- A special interrupt button located inside so that the patient can stop treatment at any time

- Selectable delayed start mode allows machine to be set up by the technician and started by the patient.

- Programmable maximum time and dose entry limits for both UVA and UVB

- Computer memory allows review of all entered and achieved treatment data

- Unequaled safety features increase efficiency and patient confidence

- An overhead mirror allows the operator clear view of the patient with minimal compromise of privacy

- UV transparent lamp sleeves completely contain broken glass unlike wire grids, yet absorb less light

- Two high volume 10” fans provide patient comfort and heat dissipation

- Large non-tipping patient platform raises patient above bottom of lamps

- A full-size polycarbonate floor plate confines the machine and protects the floor underneath

- Purchaser can easily install plug-in components in minutes

 WARRANTY:

- Two year warranty on parts excluding lamps.

DIMENSIONS:

- 6’4.5”  high excluding mirror

- 7’10”   high with mirror

- 3’10” (46”) approximate diameter

- 4’0” x 5’0” requires minimum operating area

- 300 lbs. fully assembled

ELECTRICAL REQUIREMENTS:

- Dedicated 208/230 volt single phase circuit

- 40 ampere, 2 pole circuit breaker

VENTILATION REQUIREMENTS:

- Heat load 5,000 watts - 17,000 BTU when full unit is on

Contact us for further information and pricing.